As these things go, I was making accessories for the modules comprising the siding at Scenic and decided to make some extras as a way of holding momentum. Some of the additional parts were for Merritt, a siding and wye 14 miles east of Scenic and some were for future projects. One such project lay four miles west of Skykomish at the old town site of Grotto. Now a sleepy cluster of cabins, Grotto was once an industrial hub of the valley and dutifully coated the surrounding area in a layer of dust resulting in interesting looking vegetation. Today you’d never no there was anything but trees and dense underbrush.
And here in this Lee Pickett photo from the UW library collection you can see a similar view taken just a bit to the right and looking about ten degrees to the east some 86 years prior: http://digitalcollections.lib.washington.edu/cdm/singleitem/collection/pickett/id/1460/rec/1
A recent trip to the Skykomish Historical Society Museum (http://skyhistory.org/) produced a binder of “new” old pictures both of Grotto and the Northwest Portland Cement Co. plant that gave it reason to exist. Most of the overall shots of the plant layout are from the time of its construction in 1928 but there were a handful of very useful colour photographs of the plant in its final days. They illustrate changes made to the layout after the quarry on the south side of the Skykomish River played out and the aerial tram was pulled up. Among these, the most notable for my model of Grotto are the differences in the cement storage facilities, altered to reflect changes in car loading procedure as well as the rail-fed limestone business that began in the 1950s when local supplies dried up. My knowledge of the details of these structural changes is limited to what I found in the museum collection (no dimensions). Luckily fellow Goat Don Pavia was in town and suggested I check tax assessment records preserved in a local college. That sounded like it would give a good return but I couldn’t wait.
After hurrying home I drew up a plan for a section of the plant and siding that is 24″X70″. At that size it’s just small enough to get in my pick-up truck and in theory easy enough for one person to cart around. The first couple of nights that followed were spent making several miles of 3/4 height ties from basswood sheet followed by a meeting with the flex track committee and a sheet of foam. Eventually I settled on a version of the plan below using a leaf to represent everything in the foreground from the rock un-loader to in-bound silica, iron ore and fire brick. I don’t have accurate info on these spurs so avoiding them altogether seems like the best plan. The only modelled industry siding is for covered hopper and bag loading out-bound portland cement in boxcars. It connects back into the Mainline west of the siding.
For a photo of Grotto depot during the white paint era care of Stan Styles: http://www.gn-npjointarchive.org/GNRHSDepot/GNRHS.Depot.43.62.15.jpg
Eventually this layout section will tie in with my other sidings to form some sort of model railroad but before that happens I will likely make either a pair of 2′-3′ sector plates or a temporary hidden loop to represent the mainline. Just joining it to Scenic means skipping Skykomish and tying into a much steeper grade, neither of which is very appealing. Whatever the course chosen, some form of lead will be necessary in order to switch the plant and to do anything more than stub switching of the siding. If 3′ sector plates are used at both ends I’ll be in for just under twelve feet end to end which means that the layout could be operated out of a bedroom with the door opened to allow slight intrusion into the hallway.